Reef Frontiers en-us Fri, 23 Aug 2019 03:30:56 +0000 PhotoPost ReviewPost 5.0 60 Theo, Heater; 50W - 100W - 200W - 300W Mon, 07 Jun 2004 12:19:25 +0000 <a href=";title=theo-2c-heater-3b-50w100w200w300w&amp;cat=7"><img title="906theo_quote_a2.jpg" border="0" src="" alt="906theo_quote_a2.jpg" /></a><br /><br />by: NeilsReef<br /><br />Description: The first shatter-proof heater thanks to the peculiar glass tube. Maximum security: : THEO is shock resistant thanks to the PTC heating element and the shatterproof glass tube. Free positioning in the aquarium: vertical, horizontal and completely submerged. Self-limiting: : the patented PTC heating system guarantees operation in complete security because in case of dry running there is no danger for damage. The 50W and 100W models are the smallest available on the market, they measure only 17.8 cm e 22.6 cm (7 in e 8.9 in ). Visitherm Heater Sat, 05 Jun 2004 22:37:35 +0000 <a href=";title=visitherm-heater&amp;cat=7"><img title="327marineland1.jpg" border="0" src="" alt="327marineland1.jpg" /></a><br /><br />by: Curtswearing<br /><br />Description: The Visi-Therm Deluxe is a self contained 200w heater that allows you to dial in the temperature with a click set thumb screw. The temperature gage has marking for every 3 degrees from 65- 86 Fahrenheit or 1832 Celsius. It comes with a suction cup mounting bracket. Titanium Heater Sat, 05 Jun 2004 22:34:47 +0000 <a href=";title=titanium-heater&amp;cat=7"><img title="327won_pro.jpg" border="0" src="" alt="327won_pro.jpg" /></a><br /><br />by: Curtswearing<br /><br />Description: -Titanium heating tube -Fully submersible -Automatic protection device activates when sensor wiring is disconnected or shorted. -Double heating tube -Very durable &amp; reliable -Safe &amp; easy temperature control -Operating temperature range: 68º F to 93º F -Ideal for SALTWATER &amp; FRESHWATER -Available sizes are: 50 watt, 75 watt, 100 watt, 150 watt, 200 watt, 250 watt, 300 watt, 350 watt &amp; 500 watt Size guidelines (they heat up fast and less wattage than glass heaters is generally needed): 0-10 Gallon Tank - 50 watts 10-40 Gallon Tank - 100 watts 40-150 Gallon Tank - 200 watts 150-250 Gallon Tank - 300 watts Over 250 Gallon Tank - 350 watts none Sat, 05 Jun 2004 22:32:01 +0000 <a href=";title=none&amp;cat=7"><img title="327hagen_heater.jpg" border="0" src="" alt="327hagen_heater.jpg" /></a><br /><br />by: Curtswearing<br /><br />Description: Tronic Submersible Electronic Heater - 50 Watts - 7&quot; - Maximum aquarium capacity: 15 U.S. Gallons - Provides accurate thermal control - Fast heat technology works constantly to achieve the right temperature - Fully submersible - Built to last - Safety Shut-off CC-25 Sat, 05 Jun 2004 22:22:28 +0000 <a href=";title=cc-25&amp;cat=7"><img title="327via_aqua_chiller.jpg" border="0" src="" alt="327via_aqua_chiller.jpg" /></a><br /><br />by: Curtswearing<br /><br />Description: a 1/5hp chiller that is small, compact, easy to hook up, and relatively quiet. it requires a pump with flow of 300-500 gph. c-280 chiller 1/10 hp Wed, 19 May 2004 17:11:08 +0000 <a href=";title=c-280-chiller-1-2f10-hp&amp;cat=7"><img title="155pc-280.jpg" border="0" src="" alt="155pc-280.jpg" /></a><br /><br />by: bradreef<br /><br />Description: This is a great product that is capable of a 30 degree pulldown at 60 gallons and 10 degree's at 120 gallons. min flow 300gph and max 600gph. very quiet. Sun, 25 Jan 2004 19:01:40 +0000 <a href=";cat=7"><img title="41Custom_SeaLife_Drop-In_Water_Chillers.jpg" border="0" src="" alt="41Custom_SeaLife_Drop-In_Water_Chillers.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: Drop-In Water Chillers are built to last. Made with duplex stainless steel probes with 6' leads, electronic LCD temperature controllers, super-consistent 1-degree Fahrenheit differential, and brazed, leak-free refrigeration joints. Backed by an 18-month warranty. Guaranteed even in saltwater. Sun, 25 Jan 2004 18:58:55 +0000 <a href=";cat=7"><img title="41Ebo_J_ger_TS_Automatic_Aquarium_Heaters.jpg" border="0" src="" alt="41Ebo_J_ger_TS_Automatic_Aquarium_Heaters.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: The TS Automatic Aquarium Heater by Ebo Jäger. Advanced sensor holds temperature steady! Features heavy-duty 2mm thick, shock-resistant Pyrex glass construction. Temperature adjustable from 64° to 90°F. Thermostat is accurate from ±0.5°. Six foot double insulated power cord and suction-cup attachment included. Completely submersible. Perfect for fresh or saltwater use. Sun, 25 Jan 2004 18:55:53 +0000 <a href=";cat=7"><img title="41Thermoelectric_Heater_Chiller.jpg" border="0" src="" alt="41Thermoelectric_Heater_Chiller.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: Put an end to temperature fluctuations. Keep temperature &quot;just right&quot; around the clock. Using advanced thermoelectric technology, these new external heaters/chillers are extremely reliable for controlling water temperature, performing two functions – heating &amp; cooling – in one simple unit. They are super-quiet in design, energy-efficient, and do not use Freon. The units feature an accurate digital temperature controller, and are compatible with fresh and saltwater systems. For 20-55 gallon aquariums. Units install in-line to your internal or external pump. Due to flow restriction, a pump with a maximum gph rating of 250 is recommended. Sun, 25 Jan 2004 18:53:29 +0000 <a href=";cat=7"><img title="41Titan_Thermoelectric_Chiller.jpg" border="0" src="" alt="41Titan_Thermoelectric_Chiller.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: The 150 W Titan Chiller is ideal for cooling aquariums under 40 gallons, especially mini reef aquariums. Using the thermoelectric method, which converts electrical current directly into cooling power, you don't have to use any unsafe cooling gasses or a compressor. A transformer is integrated in its housing, so it can be plugged directly into an electrical outlet. Uses an easy-to-program digital temperature controller, powers itself back on after a power outage - when you need it most. Contains main switch, and can be hard plumbed with PVC. Requires a pump (not included) with a recommended minimum flow rate between 50-200 gph. 7.8&quot; x 9.8&quot; x 9.8&quot;. Unit Includes: A temperature computer with digital display Input and output connections A main switch Solid plastic cover Sun, 25 Jan 2004 18:10:30 +0000 <a href=";cat=7"><img title="41Delta_Star_In-Line_Water_Chiller.jpg" border="0" src="" alt="41Delta_Star_In-Line_Water_Chiller.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: In-Line Tube In Shell Evaporator Helix Titanium Coil Fresh or Saltwater Use Compact Design Quiet Operation Black ABS Cover Ozone Friendly Refrigerant (134A) Requires Temperature Controller Sun, 25 Jan 2004 18:02:29 +0000 <a href=";cat=7"><img title="41Aqua_Logic_Chillers.jpg" border="0" src="" alt="41Aqua_Logic_Chillers.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: Features: Design and construction of heat exchanger provides a 25% BTU/ watt advantage over all other chillers. Aqua Logic units have a unique titanium coil, which offers 3 times the surface area of probe type chillers. Size: Remote coil design of Cyclone allows smallest footprint of any chiller. 5 ft. refrigeration line from unit to coil. Noise: Spring mounted hermetic motor/compressor allows quiet performance. These units are the quietest units available. Reliability: Unbeatable. Uses all aircraft grade fittings assure a leak free system, with years of problem free usage. Sun, 18 Jan 2004 02:41:18 +0000 <a href=";cat=7"><img title="41Temperature_Controller_Dual_Stage.jpg" border="0" src="" alt="41Temperature_Controller_Dual_Stage.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: Aqua Logic digital temperature controllers can be used in a variety of applications where a device needs to be turned on/off based on temperature rise or fall. Operation is simple. Just the plug the device to be controlled into the controller's receptacle and plug the controller into a wall receptacle, then place the sensor probe in the water. The LCD provides a constant readout of the sensed temperature. A three-button touch keypad allows easy selection of F or C degrees, set point temperature, differential, and operating mode (heating or coolong). A keypad lockout provides tamperproof protection and EEPROM memory retains control settings during power outages. The NEMA 4X enclosure is rated watertight for outdoor use. Temperature range for the controller is from -30 degrees F to 220 degrees F. The differential adjustment range is one degree F to 30 degrees F. Power cord lengths from the controller to the power source and from the controller to the device being controlled are 40&quot; (1 m) each. The temperature sensor probe, encased in titanium, has an 8' cable. Custom cables can be ordered at up to 400' in length. Dual stage controllers can be connected to both a chiller (1/2 hp and smaller) and heater (500 watts or smaller). Contactors may be used in conjunction with controllers to operate devices with higher amp loads. Sun, 18 Jan 2004 02:39:41 +0000 <a href=";cat=7"><img title="41Visi-Therm_water_heater_300_watts.jpg" border="0" src="" alt="41Visi-Therm_water_heater_300_watts.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: Completely submersible, Type A and Type B heaters are fully compatible with both saltwater and freshwater. Use them singly in small tanks and aquariums or in multiples for larger heat requirements without the need for a costly heater with temperature controller. A glowing lamp indicates on/off condition. 115V, 50/60 Hz, with 3' (1 m) cord. Type A are our best selling heater line because they can be set simply by adjusting the direct reading thermostat which reads in both F (65-89) and C (18-32). This is a very reliable heater for the price. Type B also has a built-in thermostat but without the direct reading in C only (20-30C). One year warranty. Type - A, Watts - 300, Overall length - 14-1/2&quot;. Sun, 18 Jan 2004 02:38:29 +0000 <a href=";cat=7"><img title="41Heater_Controller_120V_Digital_25_Amp.jpg" border="0" src="" alt="41Heater_Controller_120V_Digital_25_Amp.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: All controllers and heaters operate on 50 Hz or 60 Hz power sources. This controller provides al temperature display that indicates both the set and actual temperatures of the water. It can be set to display for F or C. The controller comes standard with contacts that open on temperature rise (reverse acting contacts are included). Indicating controllers are direct setting and have a plus or minus 1.5 degree accuracy rating. The controller is equipped with a 8' vinyl-sleeved sensor tube and Protector I standard safety option. It consists of a temperature-sensitive element installed in the heater which will activate to shut down all electricity entering the heater element. Low water level is the most common occurrence causing this element to activate. Once activated, the element must be replaced in order to restore power to the heating elements. This model is single phase, 120 volts, 25 max. amps, and measures 4&quot; x 3&quot; x 8&quot;. Sun, 18 Jan 2004 02:37:03 +0000 <a href=";cat=7"><img title="41Goldline_temperature_controller_115.jpg" border="0" src="" alt="41Goldline_temperature_controller_115.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: These general purpose temperature controllers can be used for a wide variety of applications including chillers, heaters, HVAC, many industrial and laboratory applications. The controller provides an isolated relay contact which is controlled by comparing the temperature sensor reading to the setpoint. The optional Digital Display Monitor displays both sensor and setpoint readings. Setpoint range -26¡ to 90¡ F, accuracy ±1¡ F. Relay output rating @ 115 VAC is 20 amps, @ 230 VAC is 10 amps. EC115 has a 4 ft. power cord and 4 ft. receptacle cord. EC230 has a 5 ft. power cord and temperature sensor w/6 ft. cable (included). Sun, 18 Jan 2004 02:36:51 +0000 <a href=";cat=7"><img title="41Economy_Submersible_Heater.jpg" border="0" src="" alt="41Economy_Submersible_Heater.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: These completely submersible heaters can be used singly in small tanks and aquariums or in multiples for larger heat requirements, without the need for larger, costly heaters with temperature controllers. A glowing lamp indicates on/off condition. Heaters are 115V/60 Hz, with 3' (1 m) cord length. Built-in thermostat reads 20-34 degrees C only. Six-month warranty Sun, 18 Jan 2004 02:35:36 +0000 <a href=";cat=7"><img title="41Heater_Module_.jpg" border="0" src="" alt="41Heater_Module_.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: This is a unique way to keep your heater out of view and harms way. The module will accept a heater with a 3/4&quot; to 1&quot; diameter. Do not exceed 1000 watts per module or a pressure of 15 psi. 1-1/4&quot; Inlet, 1&quot; Outlet Slip x Slip. Sun, 18 Jan 2004 02:33:06 +0000 <a href=";cat=7"><img title="41Titanium_heat_exchanger_12_000_btu_rating.jpg" border="0" src="" alt="41Titanium_heat_exchanger_12_000_btu_rating.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: These freon to liquid coils are quickly becoming the industry leader. With applications in the aquaculture, air conditioning, petrochemical and other numerous industries, Polar Eyes heat Exchangers have proven not only to be extremely versatile, but incredibly resilient. The use of pure titanium has completely eliminated the most significant problem to face heat exchangers, corrosion. Titanium is virtually impervious to saltwater corrosion remaining submerged in harsh environments without having to implement a scheduled replacement program. Titanium tubing features a patented transition joint system and a unique swagged copper collar which makes installation as simple as any standard 3/8 in. copper system! (On HX50 models, the suction line is 1/2 in. titanium to 1/2 in. copper and is connected with a compression fitting.) The coils are housed in a compact (6 in. diameter) polyethylene case (shell) that can withstand pressure up to 200 psi. The case features a removable titanium flange for easy internal cleaning, 1-1/2 in. slip fittings are built-in for attaching PVC pipe or PVC unions. The flange features a port for temperature probe and a threaded port for an automatic pressure switch. Case color is royal blue. Polar Eyes titanium heat exchangers are priced well below the competition by virtue of their novel design and proprietary manufacturing techniques. With prices this low for titanium, you'll never want to go back to coated copper, copper/nickel or stainless steel coils again. One year warranty. Max. flow rate is 30 gpm. Titanium exchangers carry a one year warranty on all parts. The HX cases have a lifetime warranty. HP - 3/4 to 1, BTU - 12,000 , Overall length - 17 in. Sun, 18 Jan 2004 02:32:12 +0000 <a href=";cat=7"><img title="41Inline_Heater_240V.jpg" border="0" src="" alt="41Inline_Heater_240V.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: This adjustable inline heater is perfect for freshwater systems and safe for indoor and outdoor applications, including recirculating systems. It features two internal 5.5 KW (11 KW) cuper nickel heating elements that deliver up to 37,532 BTUs of heat. Heater comes complete with an adjustable non-indicating thermostat (60-104°F, ± 2°F) and an indicator light. An internal pressure switch automatically shuts the heater off in the event of low water flow or pump failure. Minimum recommended flow rate is 12 gpm, maximum flow rate is 60 gpm. Heaters are 240V (power cord not included) and can be wired to operate either one or both heating coils. Heater draw 23 amps per 5.5 KW coil. Maximum working pressure 60 psi. Inlet/outlet 1-1/2&quot; MNPT. No check valves or water shut off valves should be installed in the piping from the outlet. All air must be bled from the system and it should be mounted in a location that does not permit air accumulation. Dimensions: 6-5/8&quot;L x 6-1/4&quot;W x 11-5/8&quot;H. One year warranty. Sun, 18 Jan 2004 02:30:54 +0000 <a href=";cat=7"><img title="41Single_Tube_Over_The_Side_120V_Heater_1_Phase_1000W_316Ss.jpg" border="0" src="" alt="41Single_Tube_Over_The_Side_120V_Heater_1_Phase_1000W_316Ss.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: Heavy-duty UL-listed (pending) electric heaters can handle almost any immersion water heater need. These industrial-type heaters are perfect for automatic temperature-controlled systems. The 316 stainless steel model is for fresh water applications. The Bayonet style is placed on the side of the tank. Never allow the water level to drop below the hot zone dimension, as heater failure and/or fire could occur. Also, keep the hot zone clean of scale buildup. Protector I safety option standard. Add &quot;A&quot; after part number for Protection II option. Heater and components are guaranteed for one year. This model is a single tube over the side heater, one phase, 1000 watts, 120 volts, 8.4 amps, with a 7&quot; hot zone, and 11&quot; overall length. Sun, 18 Jan 2004 02:28:02 +0000 <a href=";cat=7"><img title="41120V_Heater_Digital_Controller_1000W_Tube_Style.jpg" border="0" src="" alt="41120V_Heater_Digital_Controller_1000W_Tube_Style.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: These heaters offer the convenience of pre-plug wiring. To install, simply mount the heater, plug into the controller, and plug the controller into a wall receptacle. The controller is included, along with a 10' cord from heater to controller and a 10' cord from controller to wall outlet. Easy Plug heaters are Safety Protector I only. They are not outdoor rated. CE certified, UL-pending. Made in USA. This 1000-watt model is 120V tube-style with digital controller, made of 316 stainless steel for freshwater, 8.4 amps, 11&quot; overall length. Sun, 18 Jan 2004 02:25:38 +0000 <a href=";cat=7"><img title="41Power_Cooler_Chiller.jpg" border="0" src="" alt="41Power_Cooler_Chiller.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: Ideal for saltwater and hydroponic applications, these water chillers are the first designed with a Duplex Stainless Evaporator, a unique alloy specifically for use in aggressive chloride-containing environments (saltwater). The weldability of Duplex provides for a totally sealed system that is virtually leak proof. Quiet and efficient, chillers utilize internal Copeland compressors that provide many years of service. This 1/4 hp chiller is extremely compact and features noise reducing rubber feet, side hand holds, and powder-coated steel cover. Price includes a remote electronic LCD temperature controller with adjustable set point, C or F scale, constant tank temperature readout and a 6’ remote temperature system and power cord. 115V, 5.0 amps, 8 gpm min. flow, 20 gpm max. flow, 1&quot; inlet/outlet, measures 14&quot; x 12&quot; x 14.5&quot;. It ships via UPS from factory in California. Chillers have an 18-month warranty. Made in USA. Sun, 18 Jan 2004 02:24:27 +0000 <a href=";cat=7"><img title="41Ice_Probe.jpg" border="0" src="" alt="41Ice_Probe.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: The Coolworks IceProbe uses advanced thermoelectric technology to directly convert electricity into cooling power. Its unique and patented design is based upon Peltier’s Principle, making the IceProbe a highly efficient miniature heat pump! The durable aluminum probe is coated with an FDA-approved epoxy, making these units ideal small coolers for miniature aquariums, bait tanks, bioassay research, hydroponics and potable water systems. The units are capable of cooling 10 gallons of water 20 degrees below ambient temperature in an insulated tank. Probes can be mounted through the side of a tank, using the molded bulkhead kit included (1-1/4” hole required), or can be immersed (probe end only). Each IceProbe includes a separate 12V DC power supply and draws only 50 watts