Reef Frontiers en-us http://www.reeffrontiers.com/reviews Fri, 20 Oct 2017 22:20:08 -0500 PhotoPost ReviewPost 5.0 60 auto top off with pump protection auto fill ato http://www.reeffrontiers.com/reviews/showproduct.php?product=493&title=auto-top-off-with-pump-protection-auto-fill-ato&cat=9 Mon, 19 Dec 2005 20:18:44 -0600 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=493&amp;title=auto-top-off-with-pump-protection-auto-fill-ato&amp;cat=9"><img title="8357IM000604.JPG" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/8357IM000604.JPG" alt="8357IM000604.JPG" /></a><br /><br />by: professionalbum<br /><br />Description: The best auto top off controller on the market don`t be fooled by other types of top off`s this 1 has all the feature`s you have been looking for at a great price heavy duty abs enclosure with o-ring seal sealed indicators and audio and flashing alarm lighted selector switch 120 vac primary voltage and 24VDC control voltage the safest heavy duty brackets with thumb screws has stainless steel solenoid valve, pump protection with GFCi built to last. check out the complete line of auto top off controllers at www.oceanussystems.com Reefkeeper http://www.reeffrontiers.com/reviews/showproduct.php?product=489&title=reefkeeper&cat=9 Thu, 24 Mar 2005 14:47:05 -0600 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=489&amp;title=reefkeeper&amp;cat=9"><img title="63reefke2.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/63reefke2.jpg" alt="63reefke2.jpg" /></a><br /><br />by: mattseattle<br /><br />Description: Digital Light Timer - A light timer can programmed with an on and off time in 15 minute increments. Some or all of the channels can be programmed to be a timer. Wavemaker (with softstart) - There are 3 wavemaker cycles in the ReefKeeper, cycles A, B and C. When a channel is designated as a powerhead a cycle must be chosen for that channel. Cycles A/B alternate opposite each other, while cycle C alternates on and off independently. Under the wavemaker setup you choose how long you want each cycle time to be by dialing an A/B cycle time and a C cycle time. In normal operation an ‘A’, ‘B’ and/or ‘C’ is displayed on the LCD to indicate which cycle is on. During night mode the cycle times double creating a calmer environment. You can also program individual channels to be off during night mode if desired. Softstart - Softstart is a much debated issue in the aquarium community; many argue about whether or not it even exists. The reality is that both camps are right in some way. Softstart does exist, however, it isn’t practical or cost- effective to implement perfectly. Digital Aquatics does implement “softer-start” for all channels. This is done to reduce the “clanking” of the impeller when a powerhead is turned on. Put Digital Aquatics to the test! The way to judge a product’s softstart capability is to listen to the pump when it turns on; there is always some clanking, but the goal is to reduce it as much as possible. Digital Aquatics tested many other products and has implemented what it feels is the best performing softstart available. Also, powerhead design is improving over time and pumps like the MaxiJet brand last much longer than some others. Feed mode - Feed mode can be programmed to be from 1 to 20 minutes long. When the “Feed” (top) button is pressed the ReefKeeper turns off all powerheads and sump pumps for the set time or until “Feed” is pressed again. Feed mode helps reduce the bio load on the tank by, maximizing the food eaten by fish and corrals and minimizing waist. Food will not get whisked away into the sump filter and to dead spots in you tank. Feed mode is also useful when it is time to perform maintenance on your tank and you need all the water pumps to be temporarily turned off. Night mode - The ReefKeeper goes into night mode when all light channels are turned off. When in night mode the wavemaker cycles double creating a calmer night environment. Also, each powerhead can be programmed to be off during night mode. Digital thermometer and temp control (temp probe included) The ReefKeepers digital thermometer is a reliable temperature sensor that is digitally filtered to provide accurate readings. Using the temperature measured the ReefKeeper controls one or more heaters and fan/chillers. The thermometer can be calibrated by the user so that near perfect (0.1 degree resolution) accuracy can be achieved from year to year. Fan/Chiller control - The ReefKeeper turns on chillers and/or fans when the temperature in the tank exceeds a limit. Most aquarists don’t want to listen to their hood fans when then don’t need to. The ReefKeeper allows the fans to be off unless they are needed to keep the water temperature down. This way you only have your fans on when you absolutely need them. A temperature limit can be chosen for the fan/chiller in 0.1 degree increments. Metal halide “sure-on” - Metal halides lights are notorious for not turning back on after a power interruption. This is because they cannot be lit when they are still hot. The ReefKeeper’s Sure-On feature detects power interruptions and allows a metal halide bulb to cool before turning back on. Since the ReefKeeper has an internal battery it will always be able to keep time and settings despite power interruptions of any length. If a metal halide channel is being held off by Sure-on after a power interruption, the LED associated to that channel will blink until the metal halide channel is turned on again. 8 programmable channels (No need for separate X-10 devices) The 8 controlled outlets are built into the ReefKeeper making it easy to install and setup. No separate X-10 devices are needed to be purchased and setup, which saves aquarists time, space and money. The power controller is very compact for an 8 channel controller and mounting is very easy. Resistive or inductive loads - The ReefKeeper can control resistive (heaters) or inductive (pumps and ballasts) loads and still supply 6A of power. Microprocessor design - The ReefKeeper has an embedded microprocessor to enable advanced features like softstart, night mode, “Sure-On” and temperature functions on different types of channels, plus much more. It drives the LCD menu system for easy setup. It also reads water temperature, digitally filtering it to provide stable and accurate readings. Display box can mount flush to cabinet for professional look - The display unit has two mounting options to accommodate different configurations. It can be mounted flush to your hood/cabinet for a sleek look by cutting out a rectangle. It can also be mounted easily to any flat surface. The outlet box mounts to a flat surface. High power design: 15A total power, 6A per channel - A maximum of 15A can be supplied by the ReefKeeper, and each of the 8 channels can supply 6A (as long as the total current is less than 15A). A heavy duty power cord and a fused supply provides the safety that is needed for home use. User optically isolated from AC power The power switches use optically isolated controllers to provide the highest level of safety in a water environment. Splash proof face plate - The front of the remote display has a custom faceplate so that a little water on it doesn’t cause any problems. The unit menu system can be navigated with wet hands without any problems. Internal backup battery for clock and settings - The internal battery will last for years keeping the time and settings of the ReefKeeper. The battery also allows power interruptions to have little effect on the system which is especially important when you are gone for days at a time. A power outage will not require the adjustments that to traditional light timers need after the power is restored. Simple menu system for easy configuration - The menu system is a simple to use interface that allows you to setup the ReefKeeper to meet your specific needs. The 3 buttons to the right of the display are used to navigate through the menu for setting up which features you want to link to which outlets and other setup. Osmolator 3155 http://www.reeffrontiers.com/reviews/showproduct.php?product=488&title=osmolator-3155&cat=9 Thu, 24 Mar 2005 14:42:02 -0600 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=488&amp;title=osmolator-3155&amp;cat=9"><img title="633155.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/633155.jpg" alt="633155.jpg" /></a><br /><br />by: mattseattle<br /><br />Description: Water level regulator with two sensor holding devices, extension and numerous fastening accessories. It is suitable for cabinet filter plants in TUNZE Comline filters or on the edge of the aquarium. This osmotic regulator can also be used in TUNZE SYSTEM cabinet filter plants. The sensors can be stuck to glass surfaces or can be fitted directly to the edge of the tank. Delivery condition: Ready for mounting with power supply unit, metering pump, hose, sensor holding device. Metering pump capacity: 0.9 m: 52 l/h, 1.5 m: 47 l/h, 2 m: 27 l/h, Hmax: 2.2 m Pinpoint Orp Controller http://www.reeffrontiers.com/reviews/showproduct.php?product=460&title=pinpoint-orp-controller&cat=9 Mon, 07 Jun 2004 08:04:16 -0500 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=460&amp;title=pinpoint-orp-controller&amp;cat=9"><img title="906orpcontroller2.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/906orpcontroller2.jpg" alt="906orpcontroller2.jpg" /></a><br /><br />by: NeilsReef<br /><br />Description: PINPOINT ORP (REDOX) Controller™ is an inexpensive rugged controller complete with a platinum ORP probe. This device will automate another electrical device like an ozonizer or ozone generation unit within a range selected by the user. This full feature controller will accommodate an electrical device up to and including 5 full amps. Comes complete with probe. The PINPOINT ORP Controller™ is the perfect way to automate ozone in the aquarium. 110 VAC operation. Never needs calibration. Replacement ORP probe. For more details, see Users Guide Pinpoint pH Controller http://www.reeffrontiers.com/reviews/showproduct.php?product=459&title=pinpoint-ph-controller&cat=9 Mon, 07 Jun 2004 08:02:05 -0500 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=459&amp;title=pinpoint-ph-controller&amp;cat=9"><img title="906phcontroller2.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/906phcontroller2.jpg" alt="906phcontroller2.jpg" /></a><br /><br />by: NeilsReef<br /><br />Description: PINPOINT pH Controller™ is an inexpensive yet rugged controller, which includes the appropriate probe and calibration fluids. This device will automate another electrical device such as a calcium reactor or magnetic solenoid for the addition of CO2 into an aquaculture or process system. This full feature controller will handle up to 5 amps. Comes complete with probe and calibration fluids. The PINPOINT pH Controller™ is perfect for the freshwater planted aquarium keeper as well as the serious saltwater hobbyist. Will control pH in both a downward and upward direction. The user will select his or her own setpoint and any range of acceptable pH around this setpoint. 110 VAC operation. Additional calibration fluid. Replacement pH probe. For more details, see Users Guide Pinpoint Remote Sensor http://www.reeffrontiers.com/reviews/showproduct.php?product=458&title=pinpoint-remote-sensor&cat=9 Mon, 07 Jun 2004 07:59:18 -0500 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=458&amp;title=pinpoint-remote-sensor&amp;cat=9"><img title="906sensor.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/906sensor.jpg" alt="906sensor.jpg" /></a><br /><br />by: NeilsReef<br /><br />Description: PINPOINT Remote Sensor for Wirelss Thermometer. The monitor can accept a maximum of 4 remote sensors, thus expanding the monitoring capability to 4 different locations to be displayed on the same PINPOINT Temperature Display Monitor Pinpoint Wireless Thermometer http://www.reeffrontiers.com/reviews/showproduct.php?product=457&title=pinpoint-wireless-thermometer&cat=9 Mon, 07 Jun 2004 07:56:32 -0500 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=457&amp;title=pinpoint-wireless-thermometer&amp;cat=9"><img title="906wireless_thermometer2.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/906wireless_thermometer2.jpg" alt="906wireless_thermometer2.jpg" /></a><br /><br />by: NeilsReef<br /><br />Description: Utilizing a radio wave signal, the remote sensor(s) will measure the temperature at the waterproof probe tip and send the information to the PINPOINT Temperature Display Monitor, which will display the temperature in Fº or Cº degrees. The PINPOINT Wireless Thermometer can accept a maximum of 4 remote sensors, thus expanding the monitoring capability to 4 different locations to be displayed on the same PINPOINT Temperature Display Monitor. Given proper care, the PINPOINT Wireless Thermometer™ should last a lifetime. Remote sensors can transmit temperature signals as far as 100 feet (30 Meters) in optimum conditions. The monitor and remote sensor are powered by two AAA batteries each. Monitor accepts up to four remote temperature sensors. For more details, see Users Guide pH-Controller http://www.reeffrontiers.com/reviews/showproduct.php?product=456&title=ph-controller&cat=9 Mon, 07 Jun 2004 07:48:40 -0500 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=456&amp;title=ph-controller&amp;cat=9"><img title="9067070_2.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/9067070_2.jpg" alt="9067070_2.jpg" /></a><br /><br />by: NeilsReef<br /><br />Description: This handy inexpensive pocket measuring instrument is supplied with a universal wall holder and electrode holder along with a long-life brand glass electrode, buffer solution and 9 V battery. The Auto Power Off function ensures a long life of the battery. With the optional CO2 valve and power supply unit, the pH controller can be extended into a complete CO2 control station. The switched socket outlet 7075.12 can be used to switch other valves as well. Pinpoint II Oxygen Monitor http://www.reeffrontiers.com/reviews/showproduct.php?product=452&title=pinpoint-ii-oxygen-monitor&cat=9 Sun, 06 Jun 2004 23:29:55 -0500 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=452&amp;title=pinpoint-ii-oxygen-monitor&amp;cat=9"><img title="906oxygenmonitor2.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/906oxygenmonitor2.jpg" alt="906oxygenmonitor2.jpg" /></a><br /><br />by: NeilsReef<br /><br />Description: PINPOINT II Oxygen Monitor™ will quickly and accurately display a digital readout for dissolved oxygen in either % oxygen or ppm saturation. The measurement range is 00.0 – 20.0 ppm. The probe is a high performance polarographic type, which uses pre-loaded Teflon membrane caps and electrolyte fluid. This is the #1 preferred oxygen monitor in the aquaculture industry. The PINPOINT II Oxygen Monitor™ is an extremely good value, considering its high precision and ruggedness. The PINPOINT II Oxygen Monitor™ comes complete with Membrane caps and electrolyte fluid, probe with 5-foot cable and meter. Extra Membrane Cap/Fluid kits are available, and the 4-meter probe extension cord is an optional accessory. The commercial aquaculture market purchases a significant number of these units on a very regular basis. Given proper care, the PINPOINT II Oxygen Monitor™ should last a lifetime. Competes with meters in the $700 range. Powered by a standard 9-volt battery (not included). Optional AC Adaptor Kit. Optional 4-meter probe extension cord. For more details, see Users Guide Pinpoint Conductivity Monitor http://www.reeffrontiers.com/reviews/showproduct.php?product=451&title=pinpoint-conductivity-monitor&cat=9 Sun, 06 Jun 2004 23:28:02 -0500 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=451&amp;title=pinpoint-conductivity-monitor&amp;cat=9"><img title="906hardness2.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/906hardness2.jpg" alt="906hardness2.jpg" /></a><br /><br />by: NeilsReef<br /><br />Description: PINPOINT Conductivity Monitor™ is an instrument for the measurement of hardness in freshwater. The conversions are 33 µS=17.9 ppm=1dH. Good quality reverse osmosis water measures 5–15 µS, while de-ionized water measures 0–1 µS. The Conductivity Monitor is automatically temperature-compensated and has two ranges, making it useful for different applications. The freshwater hobbyist will appreciate the instant readings for precise hardness. The saltwater hobbyist will use the PINPOINT Conductivity Monitor™ to assess the purity of deionized and reverse osmosis water. Given proper care, the PINPOINT Conductivity Monitor™ should last a lifetime. PINPOINT Conductivity Probe is permanent and may never require replacement. Powered by a standard 9-volt battery (not included). Optional AC Adaptor Kit Additional 45 µS calibration fluid. For more details, see Users Guide. Pinpoint ORP Monitor http://www.reeffrontiers.com/reviews/showproduct.php?product=450&title=pinpoint-orp-monitor&cat=9 Sun, 06 Jun 2004 23:24:57 -0500 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=450&amp;title=pinpoint-orp-monitor&amp;cat=9"><img title="906orpmonitor2.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/906orpmonitor2.jpg" alt="906orpmonitor2.jpg" /></a><br /><br />by: NeilsReef<br /><br />Description: PINPOINT ORP Monitor™ will measure the ORP (oxidation-reduction potential, or REDOX) of your system. It is popular with those who use ozone gas or potassium permanganate as an artificial oxidation agent in fresh or saltwater. Constant monitoring of the ORP is useful in keeping tabs on the overall health of a system, as a drop in ORP often precedes visual or other indications of trouble. Many serious marine enthusiasts who do not use ozone gas use this meter to judge the overall health of their reef systems. This unit features a 1mV digital resolution and a platinum electrode. Comes complete with meter and probe. Given proper care, the PINPOINT ORP Monitor™ should last a lifetime. PINPOINT ORP Probe comes with a 10 foot high supression cable and a BNC connector. The range is –2000 to 2000 mV. Powered by a standard 9-volt battery (not included). Optional AC Adaptor Kit. Replacement ORP prob Pinpoint pH Monitor http://www.reeffrontiers.com/reviews/showproduct.php?product=449&title=pinpoint-ph-monitor&cat=9 Sun, 06 Jun 2004 23:22:51 -0500 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=449&amp;title=pinpoint-ph-monitor&amp;cat=9"><img title="906phmonitor2.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/906phmonitor2.jpg" alt="906phmonitor2.jpg" /></a><br /><br />by: NeilsReef<br /><br />Description: The PINPOINT pH Monitor™ is in use by thousands of customers worldwide. This affordable unit remains the only full-time pH monitor with .01 resolution. The PINPOINT pH Monitor™ requires only a 9-volt battery and is sold complete with probe and calibration fluids. The electrode is also available separately and fits any meter or monitor. Comes complete with meter, probe and all calibration fluids. Given proper care, the PINPOINT pH Monitor™ should last a lifetime. PINPOINT pH Probe comes with a 10 foot high supression cable and a BNC connector. Powered by a standard 9-volt battery (not included). Optional AC Adaptor Kit. Replacement pH probe. Additional calibration fluid. For more details, see Users Guide. Salinity Monitor http://www.reeffrontiers.com/reviews/showproduct.php?product=436&title=salinity-monitor&cat=9 Sat, 05 Jun 2004 18:44:19 -0500 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=436&amp;title=salinity-monitor&amp;cat=9"><img title="327pinpoint.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/327pinpoint.jpg" alt="327pinpoint.jpg" /></a><br /><br />by: Curtswearing<br /><br />Description: Continuously measures dissolved salt levels in your tank. Reads in microsiemens (mS), but includes a chart to cross-reference to both specific gravity (S.G.) or ‰ salt (ppt). Includes a 53.0 mS reference. http://www.reeffrontiers.com/reviews/showproduct.php?product=211&cat=9 Sun, 25 Jan 2004 13:07:58 -0600 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=211&amp;cat=9"><img title="41Tunze_Temperature_Controller-Set.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/41Tunze_Temperature_Controller-Set.jpg" alt="41Tunze_Temperature_Controller-Set.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: The Tunze Temperature Controller-Set consists of temperature controller 7027/2 and switched socket-outlet 7028.10. The unit regulates the adjustable temperature with an accuracy of 0.1°C. In case of power failure, the battery buffers the display and switching data for up to two years. The micro-processor controlled temperature measuring and regulating unit 7027/2 displays the temperature on a large digital display with an accuracy of a tenth of a degree. The robust temperature probe is completely embedded in polyurethane resin, and hence is corrosion-proof and suitable for permanent measurement http://www.reeffrontiers.com/reviews/showproduct.php?product=209&cat=9 Sun, 25 Jan 2004 13:05:43 -0600 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=209&amp;cat=9"><img title="41Tunze_CO2_Controller-Set.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/41Tunze_CO2_Controller-Set.jpg" alt="41Tunze_CO2_Controller-Set.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: The Tunze CO2 Controller-Set consists of pH Controller 7070, CO2 valve kit 7074.11 incl. power supply unit 5012.01. On account of the adjustable time interval metering system, a careful CO2 distribution is possible preventing an overdose. The pH Controller 7070 is a handy pocket-sized measuring instrument with wall holding device has a 13 mm, 3½-digit digital display, and is supplied complete with a long-life brand electrode made of glass, buffer solution, and 9 V battery. By connecting a CO2 valve, the pH controller can be extended to a complete CO2 control station http://www.reeffrontiers.com/reviews/showproduct.php?product=206&cat=9 Sun, 25 Jan 2004 13:00:16 -0600 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=206&amp;cat=9"><img title="41Aqua_Medic_pH_Controller_and_Refillable_Electrodes.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/41Aqua_Medic_pH_Controller_and_Refillable_Electrodes.jpg" alt="41Aqua_Medic_pH_Controller_and_Refillable_Electrodes.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: The Aqua Medic pH Controller 2001 C is a precision instrument to control the pH value in aquaria. In combination with a CO2 system and a solenoid valve, the pH can be maintained at a constant level, and the CO2 supply to aquatic plants or into a Calcium Reactor can be controlled. The unit is supplied with a large LED display and the control range is digitally adjustable from pH 3.5 to 10.5. The pH controller has a BNC connection for pH electrodes. The use of an original Aqua Medic plastic shafted electrode is recommended. http://www.reeffrontiers.com/reviews/showproduct.php?product=204&cat=9 Sun, 25 Jan 2004 12:58:01 -0600 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=204&amp;cat=9"><img title="41Aqua_Logic_CustomSeaLife_Temperature_Controller.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/41Aqua_Logic_CustomSeaLife_Temperature_Controller.jpg" alt="41Aqua_Logic_CustomSeaLife_Temperature_Controller.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: Aqua Logic / CustomSeaLife LCD Electronic Temperature Controller- This device is operable from a distance of up to 400 feet and has a superior accuracy for pinpoint temperature control of -30 °F to 220 °F. This digital display is easy to read and a pushbutton control allows you to choose selectable heating and cooling modes. It is not easy to find all these features in such an inexpensive monitor. A keypad lockout provides tamperproof protection. EEPROM memory retains control settings during power outage. This is an OEM product for some of the largest industrial chiller &amp; heater manufacturers. Outperforms other thermostats which cost substantially more. Input power requirements 120 or 208/240 volts. Can control heater &amp; chiller of up to 9.8 amps or approx. 1,000 watts! Dimensions: 6.52&quot; x 2.7&quot; x 2.48&quot;. Made in the USA. One-year warranty. Temperature range 1 °F to 30 °F /- 1° F Differential (i.e. can be set to turn on heat at 79 and off at 80; or turn chiller (or cooling fan) on at 85 and off at 65, etc.) Easy programming of setpoints, differential and heating/cooling mode using 3 front-mounted buttons. Select F or C scales at the push of a button. Pre-wired with power cord &amp; remote sensor on 8-foot cable. Can be extended up to 400 feet using standard 22 gauge sensor wire (not included) http://www.reeffrontiers.com/reviews/showproduct.php?product=201&cat=9 Sun, 25 Jan 2004 12:51:23 -0600 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=201&amp;cat=9"><img title="41Deluxe_CO2_regulator_system_-_dual_gauge.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/41Deluxe_CO2_regulator_system_-_dual_gauge.jpg" alt="41Deluxe_CO2_regulator_system_-_dual_gauge.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: Deluxe Dual Gauged CO2 Regulator assembly includes solenoid and fine adjust needle control. http://www.reeffrontiers.com/reviews/showproduct.php?product=167&cat=9 Sun, 18 Jan 2004 15:58:35 -0600 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=167&amp;cat=9"><img title="41netune.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/41netune.jpg" alt="41netune.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: The AquaControllerPro base unit contains all the necessary capabilities to monitor and control even the most demanding aquarium setup. All of the features described below are present in the base unit; there are no additional software upgrades to buy. The AquaControllerPro is able to: Monitor: pH, ORP, Temperature, Conductivity, and Dissolved Oxygen Control: pH, ORP, and Temperature, Conductivity, and Dissolved Oxygen Timers Simulate Sunrise/Sunset Simulate a Moon Cycle Control Powerheads/Pumps (Wavemaker) 2 External Switch Inputs 4 Digital Outputs Programming Language Alarms Perform Datalogging PC or Macintosh RS232 Serial Interface Flash Memory for easy Firmware Upgrades Large Backlit LCD Display Display Lock with password protection Battery Backup Battery Low Warning Power Fail Alarm Direct Modem Connection Paging Support Remote dial-in support Diagnostics http://www.reeffrontiers.com/reviews/showproduct.php?product=107&cat=9 Sun, 18 Jan 2004 14:14:13 -0600 <a href="http://www.reeffrontiers.com/reviews/showproduct.php?product=107&amp;cat=9"><img title="41Octopus_3000_Water_Monitor_wBacklit_Display.jpg" border="0" src="http://www.reeffrontiers.com/reviews/data/9/thumbs/41Octopus_3000_Water_Monitor_wBacklit_Display.jpg" alt="41Octopus_3000_Water_Monitor_wBacklit_Display.jpg" /></a><br /><br />by: mojoreef<br /><br />Description: Similar to Aquanode, but without D.O. and networking capabilities, this water quality monitor is ideal for small recirculating systems, aquariums, hatcheries, and hydroponic systems. It can provide continuous monitoring of pH, temperature, ORP, and conductivity. By adding X-10 control interface and optional control satellites, the Octopus can also provide control for ozone generators, heaters/chillers, and chemical dosing pumps. It will warn of unexpected changes in water quality by a built-in audible alarm or by a pager (with optional Modem and Pager Support). AquaWeb provides continuous monitoring and 7-day data logging with multi-parameter graphing, all available through a modem or connected personal computer. The Octopus includes 16-channel lighting control, which acts as a timer for lighting systems, wavemakers, and/or feeding devices. A temperature probe with 10' cable is included. Power 115V/60 Hz. Dimensions 8&quot; x 5&quot; x 1&quot;. One-year warranty on monitor. Made in USA.