<---->

    1. 41Affinity_bead_filter.jpg
      41Glove_3_4_length.jpg
      41GFI_plug.jpg
      More Items

      Previous Product    Next Product
      Affinity bead filter
      Reviews Views
      0 1052
      spacer
      Recommended By Average Price Average Rating
      No recommendations None indicated None indicated
      41Affinity_bead_filter.jpg


      41Affinity_bead_filter.jpg









      Description: Designed to remove suspended solids (those little food and waste particles that neither float nor sink) from aquaculture water. Dirty water is directed up through the threaded inlet into the bead chamber which is filled with electrostatically charged beads that have an affinity for, and therefore trap, suspended solids. The filtered water then travels up and out of the bead filter by gravity. Air is used to backwash and clean the beads at least once daily. This requires 10 cfm at 2 psi. 90 gallons of water is discharged at each cleaning. (Support stand not included.) Beads are included. Made out of fiberglass with smooth white gel coat interior. Ships motor freight. Manual back-flushing dumps only a single filter volume and takes only one minute, using low pressure (less than 1 CFM) air to tumble the beads (not included). The ABF1, rated up to 20 gpm, is molded in semitransparent polyethylene. Easily disassembled for cleaning. Sold complete with required screens, valves, piping, beads, and instructions. A mounting support ring is also included. Ports are 1-1/2 in. A 55 lb. (1.65 cu. ft.) bag of replacement beads is enough for two changes. Made in USA. 24 in. diameter x 36 in. tall.
      Find the lowest price for the :
      Reef Keeper
       
      Posts: 7,855
      Registered: July 2003
      Location: Sumner




Powered by: Reviewpost vB3 Enhanced
Copyright 2010 All Enthusiast, Inc.