Quantcast

Kent Tech CB

Help Support Reef Frontiers:

WaterDogs

Well-known member
Joined
Sep 5, 2003
Messages
374
Location
Snohomish, WA
Is "Kent Tech CB parts A & B" a good to excellent choice for a Balanced Calcium & Buffer Solution?
My tank has a light to medium load of corals and fish and this product looks like the ticket for me.

Dwaine
 

gobie

dave the gobie
Joined
Dec 2, 2004
Messages
366
Location
Auburn
I Used Tech C/b For Years, And Got Good Results. Almost Better Results Than My Reactor I Use Now. My Feeling Is If You Use One Kent Product You Should Use Nothing But Kent Because I Don't Think They Mix As Well With Seachem.
 

cwcross

Well-known member
Joined
Aug 18, 2004
Messages
250
Never used it...so can't offer advice either way.

If it was me, I would just use Baking Soda and CaCl2. Much cheaper and same active ingredients. Just my opinion though. Also if you are interested, I'm sure myself or someone else on the board could give you the recipe for a good homeade 2-part...again much cheaper. Also I would recomend Kalk unless you Ca demand is so high, you actually need a 2 part. That way you don't have to worry about balance as much...Collin
 

WaterDogs

Well-known member
Joined
Sep 5, 2003
Messages
374
Location
Snohomish, WA
Thanks for the replies and I will check out the homemade solution, I don't have a lot of time to mix chemicals so sometimes it works out better just to buy it from the right place.

Dwaine
 
Your email address will not be publicly visible. We will only use it to contact you to confirm your post.
Top